Oil & Gas Sampling Cylinders Single End with Dip Line

Features:

• Aone Sampling Cylinder and Sample bombs are designed to provide safe containment for storage,
• examination and transportation of both liquids and gases.
• Available in Single ended , double ended and flat ended.
• Natural Gas Sampling bombs are perfect for sampling
• corrosive gas and pressurized gas. Double ended Sampling cylinders are most commonly used. We have ability to customize Sampling Cylinders to suit your exact needs.
• The range is designed for and used across the world in various industries, including petrochemical refineries and well sites, analytic laboratories , sensitive chemical , alternative fuel technologies, and manufacturing.
• Aone is the most reputed manufacturer and exporter of these sample cylinders and Gas Sampling Bombs

Material availability for Sampling Cylinders:

• Sampling Cylinder are available in Stainless Steel 304 ( SS 304 ), Stainless Steel 316 Cylinder With Dip Line .
• Monel

Applications:

• Sampling hydrocarbons in refineries and petrochemical plants
• Sample collection in labs
• Small and short storage
• Transportation under pressure environment
• Gas sampling for chromatographic analysis
• Snubbers in reactor feed lines
• Surge accumulators in high pressure gas systems
• High vacuum systems as experimental chambers and molecular sieves
• Chemical reaction vessels
• Testing and Calibration
• Transformer Oil Handling

Safety compliance:

CE , ISO & TPED certification

Note :

before Placing Order Follow FAQ
1) Once Confirm Chemical Capability
2) Pressure Rating
3) Connection Size

Oil & Gas Sampling Cylinders Double & Triple End

Features:

Material availability for Sampling Cylinders:

• Sampling Cylinder are available in Stainless Steel 304 ( SS 304 ), Stainless Steel 316 Cylinder.
• Monel

Applications:

Safety compliance:

CE , ISO & TPED certification

Note :

before Placing Order Follow FAQ
4) Once Confirm Chemical Capability
5) Pressure Rating
6) Connection Size

Fittings and Accessories:

GAS GENERATORS FOR ANALYTICAL INSTRUMENT

1) Zero Air Generator for GC / TOC (Online / Offline)

Zero Air Generator produces a continuous flow of high purity Zero Air at selected pressure
• For TOC Analyzer, compressor takes the air from atmosphere, the hot air is then passed
through copper cooling coil
• The cool air is then passed through furnace where hydrocarbons are cracked at high
temperature (temp. range 300°C to 400°C) in presence of catalyst.
Thefurnace reaction at higher temperature breaks the hydrocarbon into CO2 & H O 2
• Water is drained away through 5μ & 0.01μ filter
• The modular pressure swing adsorption (PSA) unit operates with alternating pressure
increase and decrease
• Air flows under pressure through the reaction towers containing molecular sieve adsorber
• Moisture, CO, CO , THC and other unwanted 2 components in the air are adsorbed,
leaving Zero Air Gas
• The Zero Air Generators are suitable for use in laboratories and industrial environments

Applications:

• GC-FID, FPD, NPD, AED
• GC-MS, LC-MS-MS, ICP / NMR
• FTIR / IR, ELSD detector
• Purging, Ampule Filling
• Thermal instruments, Turbo Evaporator (N2 Concentrator)
• Analytical & Laboratory Instruments

Specifications:

2) Nitrogen Generator for 2 GC Model: ANG-02(A)

• Nitrogen Generator produces a continuous flow of high purity Nitrogen at selected
pressure.
• The modular Pressure Swing Adsorption (PSA) unit operates with alternating pressure
increase and decrease.
• Untreated air flows under pressure through the reaction towers containing carbon
molecular sieves adsorber. Moisture, CO, CO2, THC, O2 and other unwanted
components in the air are adsorbed, leaving Nitrogen Gas of required purity.
• During the desorption cycle, adsorbed are released again at low pressure and the
adsorber is ready for next cycle.

Features:

• Generator with PSA Technologies with auto generation
• Generator has in built pressure switch which shuts off the generator in case of over
pressure built up
• Purity ranging from 98% -99.995%
• Purity ranging from 200 ml/min – 1000 LPM
• CE certified

Applications:

• GC-FID, FPD, NPD, TCD, AED
• GC-MS, LC-MS-MS, ICP / NMR
• FTIR / IR, ELSD detector, CAD detector
• All Analytical Instruments

Specifications:

3) Nitrogen-Air Combination Generator for 2 GC Model

• Nitrogen & Air Generator produces a continuous flow of high purity Nitrogen at
selected pressure.
•The modular Pressure Swing Adsorption (PSA) unit operates with alternating pressure
increase and decrease.
•Air flows under pressure through the reaction towers containing molecular sieve adsorber.
•Moisture, CO, CO , THC, Oxygen and other unwanted components in the air are adsorbed,
leaving Zero Air & Nitrogen Gas of required purity. 2
•Nitrogen & Air combination generator is compact (2 in 1) & also cost effective and the
compressor for generating both the gases is common.

Nitrogen-Air Combination Generator for 2 GC & 5 GC Model

Nitrogen-Air Combination Generator for 5 GC & TOC Model: ANAG-01+TOC

4) Hydrogen Gas Generator

• The application of voltage across the electrolyte results in hydrolysis, breaking down the
water molecule into hydrogen and oxygen gas, which are separated by the gas permeable
membrane.
• Once separated, the hydrogen gas goes through a series of purification and moisture
removal systems to achieve the desired level of purity while the oxygen gas is being
discharged into the atmosphere.
• Electrolytic membrane technology has its advantages over alternative hydrogen
generating techniques as it is clean, requires less maintenance and there is no need to
store chemicals to maintain operation.
• Only pure double distilled water (initially some KOH), is required to provide trouble free
long term operation.
• Membrane separation is also less time consuming as only water is needed for routine
maintenance.
• Generator has in built pressure switch which shuts off the generator in case of Over
pressure built up.
• Sleep mode in case no use of H2 Production.
• Hydrogen leak detection facility inside the generator.
• Any leak detected will shut the system and hyrogen production is halted.
• Low Water alarm

Specification:

* Higher capacity model also available like 2 LPM & 3 LPM

5) 3 IN 1 Combination Generator for N2 , ZA & H2

• Combination Gas Generator for UHP Nitrogen, Zero Air & Hydrogen
a) Air Purifier & catalytic converter which includes cooling coil, Micron filters, moisture
& dust filter
b) Automatic Heatless Air Dryer timer based Operation with high efficiency dessicant
adsorbers which removes moisture upto PPM Level.
c) N2 purifier to remove O2 & produces N2 upto UHP Grade & also removes all other
unwanted impurities.
d) SS Tank for Air & Nitrogen Gas with regulator & gauge (in-built)

Capacity N2 Gas: 200 ml/min at 5 kg / cm²,
Capacity Zero Air Gas: 1500 ml/min at 5 kg/ cm².
Oil free Air Compressor In-built
• High Purity Hydrogen Gas Generator: Capacity 300 ml/min
i) High Resolution & Sensitivity
ii) LED Digital Display for flow rate
iii) Hydrogen Purity: 99.999%
iv) Working pressure: 0 to 0.4, Mpa ( 0 to 4 kg / cm² )
• Modular & Stackable, Floor Space Saving design with small footprint.

* Higher capacity model also available like 2 LPM & 3 LPM

Specification:

6) Gas Generator S-series

• Nitrogen Generator produces a continuous flow of high purity Nitrogen at
selected pressure.
• The modular pressure swing adsorption (PSA) unit operates with alternating pressure
increase and decrease.
• Untreated air flows under pressure through the reaction towers containing carbon
molecular sieves adsorber.
Moisture, CO, CO2, THC, O2 and other unwanted components in the air are adsorbed,
leaving Nitrogen Gas of required purity.
• During the desorption cycle, the trapped substances adsorbed are released again
low pressure and the adsorber is ready for next cycle.

Features & Benefits:

• No external compressor required.
• Inbuilt silent oil free air compressor.
• Automatic heatless air dryer timer based operation.
• Microcontroller based Nitrogen Generator with 2 Channel
Analog Sensors for pressure and with four relay output.
• Designed as plug & play system.

Specification:

7) Nitrogen Generator for LC-MS / LC-MS-MS (PSA Technology)

• Nitrogen Generator produces a continuous flow of high purity Nitrogen at selected
pressure.
• The modular pressure swing adsorption (PSA) unit operates with alternating
pressure increase and decrease.
• Untreated air flows under pressure through the reaction towers containing carbon
molecular sieves adsorber.
• Moisture, CO, CO2, THC, O2 and other unwanted components in the air are
adsorbed, leaving Nitrogen Gas of required purity.
• During the desorption cycle, the trapped substances adsorbed are released again
at low pressure and the adsorber is ready for next cycle.
• Flow range available from 10 LPM to 30 LPM and above.

Technical Specification for N2 Generator for LCMS (PSA Technology):

Specifications:

8) Gas Generator for LCMS (Membrane Technology)

Features & Benefits:

• Inbuilt Silent oil free air compressor.
• Inbuilt Air Storage tank for inbuilt compressor.
• Designed as plug & play system.
• Cost effective & Economical compared to imported generators.
• Gas on demand, no health hazards, no need to worry about running out of gas.
• Suitable for all Climatic conditions.
• Exstock / Fast service / Spares readily available.
• Customized gas generators also available on request.
• Floor mounted model with caster wheel.